Published: Dec 06 2018
Some boats use tiller steering while others use wheel steering. Both have advantages and disadvantages to be considered. Special techniques are used to steer tiller boats under sail. The type of steering on sailing vessels is mostly governed by boat length and weight. Many variables are considered when boats are designed, and the type of steering chosen on a particular boat provides the optimum control and convenience for the boat’s length and weight.
A tiller is essentially a pole attached to the top of a rudder, It acts as a lever to directly pull or push the rudder. The rudder is a vertical, underwater blade positioned at the vessel’s stern, which can be moved to the left or right by the tiller. The rudder steers by redirecting water past the hull, creating turning motions for course changes. On most boats, rudders are positioned more or less perpendicular to the hull's longitudinal axis, which effectively brakes the vessel when pushed "hard over" by the tiller. The tiller and the rudder work together to steer by redirecting water past the hull, creating turning motions for course changes.
Beginning in the Middle Ages, tillers on larger ships were replaced by cables, ropes, or chains that connected a steering wheel to the rudder, allowing greater rudder control with far less effort. With the advent of steam engines, metal gears replaced cables and ropes. Today, some large ocean racing sailboats use tillers, which afford an unparalleled direct steering feel.
A tiller’s simplicity, with no pulleys, chains, wires, gears, or hydraulics to complicate the steering system, makes it ideal for small sailboats. However, there are some downsides:
On the other hand, a tiller offers several advantages, including:
Steering with a tiller takes a lot of practice, especially because the tiller is moved in the direction opposite from the desired heading, exactly the reverse of steering wheel operation. The tiller is always moved in the direction opposite from which the bow is to move: if the tiller is moved to port (left) side, the bow turns to starboard (right); if positioned to starboard, the bow turns to port.
Tiller sailors are taught the saying tiller towards trouble, reminding them to push or pull the tiller towards (not away from) another boat, navigational aid, course mark, shore feature, or other potential danger that must be avoided. The saying (and its meaning) is counter-intuitive, but accounts for the fact that a tiller positioned in either direction except dead ahead will move the boat opposite the direction it is pushed.
For novice sailors, learning how to steer with a tiller can be a challenge. The best advice is to learn from an experienced helmsman in underway situations when tiller position and speed are critical, such as in heavy weather or when docking.
The ancient technique of sculling is often used on tiller boats during close-quarters maneuvering, like docking. Sculling creates drag and turns the rudder into a “steering oar” of sorts, producing forward-thrust, side-to-side movements while changing the blade angle. Sculling takes practice to generate the desired amount of speed and direction, particularly near docks or mooring/anchoring points.
A tiller extension, which is an adjustable sliding pole attached near the end of the tiller, makes it easier to move around the cockpit and generally allows easy access to control equipment. To hold the tiller in one position, sailors often use shock cord to pretension the tiller, which allows some flex in tiller movement and allows the boat to “find its own balance.”
Some sailors feel that a shiny, prominent steering wheel in the cockpit is much more nautical-looking than the tiller, but tillers do have their place, particularly on smaller sailing vessels. Sailing a tillered boat takes some practice to do so safely and efficiently, and boaters should always keep in mind, and practice, tiller towards trouble.